Dangerous Music THE SYSTEM COMPLETE

Complete Mixing and Mastering System

$ 28,091.00 28091.0 USD $ 28,091.00

$ 28,091.00

This combination does not exist.

Add to cart

Dangerous Music

FEATURES
SPECS

DANGEROUS MUSIC THE SYSTEM COMPLETE

TRUST:

Unequivocal trust demanded between collaborators.
Effortless functioning of audio systems tailored to artists and producers.
Seamless switching between roles for artists and producers.
Assurance that music will resonate in its emotive power.
Trust that listeners receive the purest form of music, moving them emotionally.

TRANSPARENCY:

"Hear Everything™" philosophy for complete control over the sound.
Craft your sound without coloration, ensuring musical identity.
Dial in precise adjustments with no artifacts, aftertaste, or hangovers.

TRANSLATION:

Addressing the challenges of diverse audio formats and playback systems.
Ensuring music translates emotively across various platforms, including radio, vinyl, streaming, downloads, and club mixes.

CONVERSION - SYSTEM COMPLETE CONVERSION FEATURES:

Track and print mixes through two channels of world-class A/D.
Blend Emphasis and X-Former circuits for tonal textures.
ClipGuard™ for character clipping without digital overs registering.
Custom metering with peak over average and zoom for critical dynamics.
16 pristine channels of mastering-grade D/A for summing into the 2-BUS+.
Bombproof master clocking to stabilize external sources.
Meticulously fine-tuned low-pass reconstruction filters.
Transparent yet musical D/A for monitoring and translating mixes.

TREATMENT - SYSTEM COMPLETE TREATMENT FEATURES:

Technological tools for timbre and tone manipulation.
The BAX for sweeping treble and bass EQ shelves with cut filters.
Phase-coherent controls preserving the original's patina.
The COMPRESSOR for gain reduction with impact, punch, and clarity.
Track and mix in stereo, dual mono, or cascade with no sonic sacrifice.
Instant switching between outboard gear, order flipping, parallel processing, and presets.

CONSOLE - SYSTEM COMPLETE CONSOLE FEATURES:

All the benefits of a console without limitations.
16 channels of unrivaled summing with wide frequency response.
Full frequency response (Flat within 0.1dB from 10Hz - 50kHz).
3 unique assignable color circuits available at your command.
Monitor control for removing the veil: "You can’t mix what you can’t hear."
Speaker, headphone, source switching, and communication under remote control.

This comprehensive system, addressing conversion, treatment, and console needs, aims to provide trust, transparency, and translation of music across various formats and playback scenarios. It combines advanced features for precise control over the sound and ensures that the music is heard in its purest form.

PRODUCT SPECIFICATIONS

CONVERT-AD+ SPECS

Signal to Noise Ratio A-weighted:
- 20Hz to 20KHz: < 121dB
Signal to Noise Ratio Unweighted:
- 20Hz to 20KHz: < 118dB
Dynamic Range A-weighted:
- 20Hz to 20KHz: < 121dB
Dynamic Range Unweighted:
- 20Hz to 20KHz: < 118dB
THD+N:
- THD+N, 1kHz, unweighted, 20Hz to 20kHz, +4dBu in: < 0.0011%
- THD+N, 1kHz, unweighted, 20Hz to 20kHz, +22dBu in: < 0.00035%
IMD (SMPTE):
- IMD, 60Hz / 7kHz, +4 dBu in: <0.0012%
Frequency Response:
- @ 96KHz sample rate 20Hz to 40KHz: +0, -0.035dB
Jitter:
- 16ps (100Hz to 40KHz), 18ps (100Hz to 1MHz)
Crosstalk rejection:
- > 118dBu @ 15 Hz – 40kHz, +/- 0.04 dB

CONVERT-8 SPECS

Signal to Noise Ratio A-weighted:
- 20Hz to 20KHz: < 114dB
Signal to Noise Ratio unweighted:
- 20Hz to 20KHz: < 113dB
Dynamic Range A-weighted:
- 20Hz to 20KHz: < 114dB
Dynamic Range unweighted:
- 20Hz to 20KHz: < 113d
THD+N:
- THD+N, 1kHz, unweighted, 20Hz to 20kHz, +4dBu out: < 94.5dB (0.00188%)
- THD+N, 1kHz, unweighted, 20Hz to 20kHz, +22dBu out: < 106.5dB (0.00048%)
Frequency Response @ 96KHz sample rate:
- DC to 20KHz: +0, -0.25dB
- DC to 30KHz: +0, -0.5dB
- DC to 40KHz: +0, -1.0dB
Jitter:
- 16ps (100Hz to 40KHz), 18ps (100Hz to 1MHz)
Crosstalk rejection:
- > 114dBu @ 1kHz
Replacement Fuses:
- USA 2 amp slo-blow for 120V
- Europe 1 amp slo-blow for 240V

CONVERT-2 SPECS

Signal to Noise Ratio A-weighted:
- 20Hz to 20KHz: < 114dB
Signal to Noise Ratio unweighted:
- 20Hz to 20KHz: < 113dB
Dynamic Range A-weighted:
- 20Hz to 20KHz: < 114dB
Dynamic Range unweighted
- 20Hz to 20KHz: < 113dB
THD+N:
- THD+N, 1kHz, unweighted, 20Hz to 20kHz, +4dBu out: < 94.5dB (0.00188%)
- THD+N, 1kHz, unweighted, 20Hz to 20kHz, +22dBu out: < 106.5dB (0.00048%)
Frequency Response @ 96KHz sample rate:
- DC to 20KHz: +0, -0.25dB
- DC to 30KHz: +0, -0.5dB
- DC to 40KHz: +0, -1.0dB
Jitter:
- 16ps (100Hz to 40KHz), 18ps (100Hz to 1MHz)
Crosstalk rejection:
- > 114dBu @ 1kHz
Replacement Fuses:
- USA 2 amp slo-blow for 120V
- Europe 1 amp slo-blow for 240V

BAX EQ SPECS

Frequency Response:
- +- 0.1dB from 10Hz to 20kHz
- +- 0.2dB from 1Hz to 80kHz
Maximum level:
- >+28dBu
Noise floor:
- <-92dBu band limited from 22Hz-22kHz
THD+N:
- <0.002%
IMD:
- <0.003%
Crosstalk rejection:
- >105dB
Replacement Fuses:
- USA 500mA fast blow for 120V
- Europe 250mA fast blow for 240V
Input Impedance:
- 25K Ohms
Output Impedance:
- 50 Ohms

COMPRESSOR SPECS

Frequency Response:
- +/-0.25dB from 15Hz to 80kHz
Maximum level:
- > +27dBu
Noise floor:
- < -93dBu band limited from 22Hz-22kHz
THD+N:
- < 0.005%
IMD:
- < 0.007%
Crosstalk rejection:
- > 115dB @1kHz
Input Impedance:
- 20K Ohms
Output Impedance:
- 50 Ohms
Replacement Fuses:
- USA 500mA fast blow for 120V
- Europe 250mA fast blow for 240V
Side Chain Filters:
- Bass cut is 6dB/octave, -3dB at 60Hz. Sibilance boost corner frequency is 1kHz with +2dB at 5kHz shelving

LIAISON SPECS

Frequency Response (Passive Section):
- +0, -0.1dB from 10Hz to 100kHz
Frequency Response (Active Section):
- +0, -0.1dB from 10Hz to 100kHz
Maximum level:
- > +28dBu
Noise floor:
- < -94.5dBu 22Hz-22kHz bandwidth
THD+N:
- < 0.002%
IMD:
- < 0.003%
Crosstalk rejection (Passive Section):
- > 124dB
Crosstalk rejection (Active Section):
- > 113dB
Input Impedance:
- 20K Ohms
Output Impedance:
- 20 Ohms
Replacement Fuses:
- USA 500mA fast blow for 120V
- Europe 250mA fast blow for 240V
Warranty:
- Free 2 year extended warranty with online registration

2-BUS+ SPECS

Max Input Level:
- > +28 dBu
THD+N:
- @+4dBu: 1KHz, unweighted, 22Hz to 22kHz < 0.0048%
THD+N:
- @+22dBu: 1KHz, unweighted, 22Hz to 22kHz < 0.0026%
IMD:
- @ +4dBu: < 0.0038%
IMD:
- @ +22dBu: < 0.0021%
Crosstalk rejection:
- > 108dBu @ 1KHz
Noise at Unity Gain:
- 22Hz to 22KHz: < -86dBu
Noise at Nominal Mix Setting:
- 22Hz to 22KHz: < -91dBu
Frequency Response:
- Flat within 0.1dB from 10Hz -50kHz
Input Impedance:
- 25K Ohms Balanced
Output Impedance:
- 50 Ohms Balanced
Replacement Fuses:
- AMERICAS: 90-120VAC 2 Amp Slo-Blo fuse.
- EUROPE: 200-260VAC 1 Amp Slo-Blo fuse

MONITOR-ST SPECS

Gain Tracking Accuracy:
- Better than 0.05dB for 6 channels
THD+N:
- 0.002%
IMD:
- 0.003%
Frequency Response:
- 1Hz-100kHz -0.1dB
Crosstalk Rejection:
- >95dB
Nominal Input Level:
- +4dBu or -10dBV
Crossover:
- -3dB @ 57Hz 18dB/octave modified Butterworth/Chebyshev
Dynamic range:
- 110dB
Maximum level:
- +25dBu
Headphone amp:
- 0.002% THD+N
Headroom:
- +25dBu to main outputs
Remote Dimensions:

Width- 31.22 CM, 12.29 IN
Depth- 10.60 CM, 4.17 IN
Rear Height- 3.90 CM, 1.54 IN
Front Height- 2.40 CM, 0.94 IN

Start with the customer – find out what they want and give it to them.

STUDIO & Recording

500 series

outboard Gear

Studio monitors

live sound

Accessories